Table of Contents
Advertisement
∫ Setting the sampling frequency
1
Attach the XLR microphone adaptor to the hot shoe of this unit, and then turn
this unit on.
2
Select the menu.
>
MENU
• This item is available only when using an XLR microphone adaptor.
[96kHz/24bit] Records high-res sound at 96 kHz/24bit.
[48kHz/24bit] Records high-quality sound at 48 kHz/24bit.
[48kHz/16bit] Records standard-quality sound at 48 kHz/16bit.
[OFF]
• The set sampling frequency is also applied to the sound output via HDMI. With [Sound
Down Convert] in [HDMI Rec Output], you can down-convert the sound output via HDMI.
(P71)
• For details, refer to the operating instructions of the XLR microphone adaptor.
Headphone
You can record motion pictures while hearing the sounds that are being recorded by
connecting a commercially available headphones to this unit.
∫ Adjusting the headphone volume
1
Select the menu.
>
MENU
[Control Dial Assignment] >[
2
Connect headphones, and rotate the control dial while the recording screen is
displayed or a motion picture is being played back.
: Reduce volume level
• You can also adjust the volume by touching [
[Motion Picture] > [XLR Mic Adaptor Setting]
Records sound using the built-in microphone.
[Custom] >
[Operation] > [Dial Set.] >
Only available when [Rec
Format] is set to [MOV].
]
: Increase volume level
] or [
] during playback.
Recording
73
(ENG) DVQX1376
Advertisement
Table of Contents
