Adjusting The Slicing Thickness; Installing The Reversible Shredding Disc Or Julienne Disc - KitchenAid KFP0935Q Instructions Manual

ASSEMBLING THE FOOD PROCESSOR

Adjusting the slicing thickness

Thinner_
Set the desired slicing thickness by
1
moving the lever to the left for thinner
slices or to the right for thicker slices.
Installing the r_ever_sible shr_edding disc or_ julienne disc
Hold the julienne disc or reversible
1
shredding disc by the 2 finger grips with
the desired shredding side facing UP .
Insert the disc adapter into the hole in
the bottom of the disc.
TIP: You may need to turn the disc/adapter until it drops down into place.
Install the work bowl cover, being sure
3
it locks into place.
10
NOTE: The lever only works with the
adjustable slicing disc. Changing thickness
settings with other discs or blades installed
Thicker_
will have no effect on operation.
Finger_ gr_ip
2
With the work bowl installed, slide the
disc adapter onto the power shaft. Then
install the work bowl cover, being sure it
locks into place.
Disc
adapter_