Listening To Fm Stations; Selecting An Fm Station - Yamaha MCRB020BLK Owner's Manual

Selecting an FM station

To listen to the FM station, connect the antenna as described in "Connecting the speakers and antenna" (☞ P. 4).
1
2

Display information (remote control only)
If you press DISPLAY on the remote control, the information shown on the front panel display will be switched in the
following order.

LISTENING TO FM STATIONS

1 Press the RADIO source button to switch the
audio source to FM.
2 Tune FM stations
Automatic tuning: Press and hold TUNING
Manual tuning: Press TUNING
If you tune to a station manually while receiving FM, the sound
will be monaural.
Preset number and frequency
* Example of reception status indication.
TUNED/STEREO: A strong FM stereo broadcast is
being received.
TUNED/MONO: A monaural FM broadcast is being
received (even if the FM broadcast is
stereo, reception will be monaural if
the signal is weak).
Not TUNED: No broadcast is being received.
Displaying Radio Data System information
(U.K. model only)
If you press DISPLAY on the remote control while Radio
Data System information is being received, the information
shown on the front panel display will be switched in the
following order.
- PS (Program Service)
- PTY (Program Type)
- RT (Radio Text)
- CT (Clock Time)
- Reception status
- Preset number and frequency
If the signal transmission of the Radio Data System station is too
weak, this unit may not be able to receive Radio Data System
information completely. In particular, RT (Radio Text) information
uses a lot of bandwidth, so it may be less available compared to
other types of information.
/ .
/ repeatedly.
Reception status*
11
En