Advertisement
Available languages
Available languages
using the appliance
Clean the epilating head and charge the appliance fully before you use the
appliance for the first time.
Note: You cannot use the appliance while it is connected to the mains.
Epilating tips
-
Epilation is easier just after taking a bath or shower. Make sure your skin
is completely dry when you start epilating.
-
Make sure your skin is clean, entirely dry and free from grease. Do not
apply any cream to your skin before you start to epilate.
-
We advise you to epilate before you go to bed at night, as skin
irritation usually disappears overnight.
-
Epilation is easier and more comfortable when the hairs have a length
of 3-4mm. If the hairs are longer, we recommend that you shave first
and epilate the shorter regrowing hairs after 1 or 2 weeks.
Epilating
Note: If you are new to epilation, start epilating with the double wavy massage
attachment to minimise the pulling sensation of epilation. This attachment is
only intended for epilating the legs.
Note: To epilate the underarms or bikini line, use the sensitive area cap that
reduces the number of active epilating discs.
1
Put the attachment on the epilating head.
2
Press the on/off button once to switch on the appliance.
The appliance starts to operate at speed II, which is the most
,
efficient speed for epilating.
Note: If you want to use speed I, press the on/off button a second time. Speed
I is suitable for areas with little hair growth, for hard-to-reach areas and for
areas where bones are located directly beneath the skin, such as knees and
ankles.
3
Stretch the skin with your free hand to make the hairs stand upright.
Place the epilating head at an angle of 90° onto the skin with the on/
off button pointing in the direction in which you are going to move
the appliance.
-
Epilate your bikini line as shown in the figure.
EnglisH
9
Advertisement
