Advertisement
Available languages
Available languages
EnglisH
10
-
Epilate your underarms as shown in the figure.
4
Move the appliance slowly over the skin against the direction of hair
growth while pressing it lightly.
5
Press the on/off button a third time to switch off the appliance.
6
Pull the attachment off the epilating head.
Tip: To relax the skin, we advise you to apply a moisturising cream immediately
or a few hours after epilation.
Tip: After epilation, use a gentle deodorant without alcohol or a special
deodorising cream for epilated underarms.
using the exfoliation brush
-
You can use the exfoliation brush dry or wet to remove dead skin
cells gently and thoroughly. Make gentle circular movements with the
exfoliation brush for a soft exfoliating effect. This helps to prevent
ingrown hairs and gives you smooth, soft and fresh-looking skin.
-
Brush your skin with the exfoliation brush one day before and two
days after epilating. After this, use it 2-3 times a week. Scrub your legs
with gentle, circular movements, starting at the ankles.
Note: When you use the exfoliation brush on dry skin, do not use exfoliating
creams, gels or foams.
Tip: To prevent dry skin in general, moisturise your skin daily with your
preferred moisturising cream.
Do not use the exfoliation brush immediately after epilation, as this may
intensify possible skin irritation caused by the epilator.
overheat protection
This function helps to prevent overheating of the appliance.
Note: To avoid overheating of the epilator, do not press the appliance too
hard onto your skin. The epilator works best when you move it over your skin
without exerting any pressure.
If the overheat protection is activated, the appliance switches off
automatically and the charging light flashes red for 30 seconds.
You can reset the overheat protection by letting the appliance cool down
and then switch it on again.
Note: If the charging light starts to flash red again, the appliance has not yet
cooled down completely.
Advertisement
