Advertisement
When you enter the "PIP Port Change" screen, the status bar will remain at "OFF"
position if you keep pressing the "DOWN" KEY to the end. At the other hand, the
status bar will remain at top item of each menu if you keep pressing the "UP" KEY to
the end.
When you press and hold the "PIP" KEY, the menu screen will show as:
DVI→VIDEO1→VIDEO2→VIDEO3→OFF→VIDEO3→VIDEO2→VIDEO1→DVI VIDEO1 ...
If you release the "INPUT" KEY for 5 seconds without any action, the menu selection
screen will be closed. And it will remain at the item which you'd selected.
When you press "MENU", "BRIGHTNESS", "PIP" Key, you will enter the menu item
selection.
Any modified or changed parameter setting will be automatically saved if you power off
or Exit the menu setting screen.
MENU KEY
When you press "MENU" KEY, the Navpixel OSD main menu screen will appear as below:
If you release the "MENU" KEY for 30 seconds without any action, the menu OSD screen
will disappear automatically. You can also choose "QUIT" and then press "MENU" KEY to
exit this OSD menu screen.
Page 20
Advertisement
