Nokia NPM-8 User Manual page 77

3590 FCC draft.book Page 69 Thursday, February 14, 2002 2:36 PM
1
Plug the loopset jack into the bottom of
your phone, as shown in the illustration.
2 Press Menu 4 6 3 (Settings > Accessory
settings > Loopset).
3 Scroll to Use loopset, then press Select.
4 Scroll to Yes, then press Select.
Note: If you want to use the headset or
TTY adapter, you need to follow steps 2-3 above, then select No to
deactivate the loopset profile.
Set up the TTY profile
You can connect your phone to a TTY/TDD device using the Nokia HDA-9
TTY adapter. In order for your phone to recognize the TTY, you'll need to
set up the TTY profile, under Accessory settings.
1
First, connect the TTY/TDD device via cable to the HDA-9 adapter.
Next, plug the HDA-9 adapter into the connector on the bottom of
your phone, as shown in the illustration.
2 Press Menu 4 6 4 1 (Settings > Accessory settings > TTY/TDD > Use
TTY).
3 Scroll to Yes, then press Select.
[ 69 ]
12