3590 FCC draft.book Page 32 Thursday, February 14, 2002 2:36 PM
4
Scroll to the language you want, then press Select.
T9 dictionary on appears.
Turn off predictive text
•
To switch from predictive text input to ABC mode, repeat steps 1
through 3 above, then select Dictionary off. OR
•
While writing the message, quickly press
7
between predictive text input and ABC mode.
Tip: Your key presses must be quick! Press
1.5 seconds.
Write words using predictive text
•
Press the number key that corresponds to the letter you want to enter.
For example to write "hello" press:
,
,
•
If the displayed word is correct, press
to accept the word and add a
space.
•
If the displayed word is not correct,
press
to see the other possible
matches.
•
If the word you are trying to write is not in the dictionary, a question
mark appears.
•
To see how many characters you have left for your message, refer to
the counter in the upper right corner of the screen.
•
Refer to "Predictive text shortcuts" later in this chapter for more details.
Add a new word to the dictionary
If the word you are trying to enter does not show up as a possible match,
you can add the word to the dictionary.
twice to switch
,
,
.
[ 32 ]
two times in about