Table of Contents
Advertisement
6 Wall mount
Note
•
Before wall mounting, make sure the wall can support
the weight of this product.
•
For wall mounting, this product must be securely
attached to the wall in accordance with the installation
instructions. Improper wall mounting may result in
accident, injury or damage. If you have any query,
contact Consumer Care in your country.
Screw length/diameter
Depending on the type of wall mounting this
product, make sure that you use screws of a
suitable length and diameter.
>25mm/0.98"
See the illustration in the quick start guide on
how to wall mount this product.
1) Drill two holes on the wall.
2) Secure the dowels and screws in the holes.
3) Hang this product on the fastening screws.
12
EN
4mm/
0.16"
7 Product
specifications
Note
•
Specifications and design are subject to change without
notice.
Amplifier
•
RMS total output power:
80W RMS (+/- 0.5 dB, 10% THD)
•
Frequency response:
40 Hz-20 kHz / +/-3 dB
•
Signal-to-noise ratio:
> 65 dB (CCIR) / (A-weighted)
•
Total Harmonic Distortion: <1%
•
Input sensitivity:
•
AUX: 2Vrms +/- 100mV
•
AUDIO IN: 1Vrms +/- 100mV
Audio
•
S/PDIF Digital audio input:
•
Coaxial: IEC 60958-3
•
Optical: TOSLINK
•
Sampling frequency:
•
MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz,
22 kHz, 24 kHz, 32 kHz, 44.1 kHz,
48 kHz
•
Constant bit rate:
•
MP3: 8 kbps-320 kbps
Radio
•
Tuning range: FM 87.5-108 MHz
(50/100 kHz)
•
Tuning grid: 50/100 kHz
•
Sensitivity
•
Mono, 26dB S/N Ratio: ≤ 22 dBf
•
Stereo, 46dB S/N Ratio: ≥ 48 dBf
•
Search Selectivity: ≤ 32 dBf
•
Total Harmonic Distortion: <3%
•
Signal to Noise Ratio: ≥ 45 dB
Advertisement
Table of Contents
