A&D UA-1200BLE Instruction Manual page 14

 The battery life varies with the ambient temperature and may be
shorter at low temperatures.
 Please use the specified charging cable shipped with the device.
 Blood pressure measurement cannot be done during charging.
 When disconnecting the AC adapter from the electrical outlet,
grasp and pull the AC adapter body out the outlet.
 When disconnecting the charging cable from the blood pressure
monitor, grasp and pull the charging cable out of outlet.
 Do not connect to equipment other than those specified.
 Do not change the battery.
 If the battery can no longer charged, please contact the dealer.
 Overcharging the battery may reduce its lifetime.
 Lithium battery replacement by inadequately trained personnel
could result in a hazard such as a fire or explosion.
Wireless Function
 In the unlikely event that this monitor causes radio wave interference to a
different wireless station, change the location where this monitor is used or
stop use immediately.
 Be sure to use in a location where visibility between the two devices that you
want to connect is good. The connection distance is reduced by the structure
of buildings or other obstructions. In particular, connection may be
impossible when devices are used on either side of reinforced concrete.
 Do not use Bluetooth® connection in the range of a wireless LAN or other
wireless devices, near devices that emit radio waves such as microwaves, in
locations where there are many obstructions, or in other locations where
signal strength is weak. Doing so may result in frequent loss of connection,
very slow communication speeds and errors.
Using the Monitor
CAUTION!
English 12