Setup Devices; Game Console Or Camcorder; Assign A Channel Decoder; Personal Computer - Philips 20HFL3330D/10 User Manual

Game console or camcorder

The most practical connection for a mobile
game console or camcorder may be at the side
of the TV. You can, for example, connect the
game console or camcorder to VIDEO/S-Video
and AUDIO L/R connectors at the side of the
TV. A HDMI connector is also available for
high-definition devices.
A permanent game console or camcorder can
be connected to a HDMI connector or EXT 3
(component) connectors at the back of the TV.

Personal Computer

Before connecting the PC:
• Set the PC monitor refresh rate to 60Hz.
See Section 8 Technical specifications for a list
of computer resolutions.
• C hange the TV picture format to Wide
Screen as described in Section 5.3 Change
picture format.
To connect a PC to the back of the TV
1. Using a VGA cable connect to PC IN
connect on the back of your TV.
2. Connect a Mini-jack audio cable from your
PC to the AUDIO IN mini-jack connector
at the back of the TV.
EN-28
7�3

Setup devices

Assign a channel decoder

Decoders that decode digital channels can be
connected to SCART. You have to assign the
TV channel as a channel to be decoded. Then
assign the connection where the decoder is
connected.
1. Press MENU on the remote control and
select Install > Decoder.
TV Menu
Smart settings
Picture
Sound
Features
Install
2. Press Æ to enter the list.
3. Press Î or ï to select the channel to
decode.
4. Press OK to select or unselect the channel.
Install
Language
Country
Channel installation
Preferences
Source labels
Decoder
Current software info
Factory reset