Rearrange Channels; Rename Channels; Uninstall Or Reinstall Channels - Philips 20HFL3330D/10 User Manual

Step 2 Search and store new TV channels
1. Press MENU on the remote control and
select Install > Channel installation
> Analogue: Manual installation >
Search.
2. Press Æ to enter the Search menu.
3. Press the red key and the number keys on
the remote control to enter the three digit
frequency. Alternatively, press the green
key to automatically search for the next
channel.
4. Press Í when the new channel is found.
5. Select Store as new channel, and press
Æ to enter.
6. Press OK to save this channel.
The channel number will is shown on the
screen.
7. Press MENU to exit.
Fine tune analogue channels
You can manually fine tune analogue channels
when reception is poor.
1. Press MENU on the remote control and
select Install > Channel installation >
Analogue: manual installation > Fine
tune.
2. Press Æ to enter the Fine tune menu.
3. Press Î or ï to adjust the frequency.
4. Press OK when done.
5. Select Store current channel to store
the fine tuned channel under the current
channel number.
6. Press Æ to enter.
7. Press OK.
8. Press MENU to exit.
6�3

Rearrange channels

1. Press MENU on the remote control and
EN-24
select Install > Channel installation >
Rearrange.
2. Press Æ to enter the Rearrange list.
3. Press Î or ï to select the channel you
want to rearrange.
4. Press the yellow key to move the channel
up the list, or press the blue key to move
the channel down the list.
5. Press MENU to exit.
6�4

Rename channels

1. Press MENU on the remote control and
select Install > Channel installation >
Rearrange.
2. Press Æ to enter the Rearrange list.
3. Press Î or ï in the Rearrange list to
select the channel you want to rename.
4. Press the red key.
5. Press Í and Æ to select characters or Î
and ï to change the characters. Space,
numbers (0-9) and other special characters
are located between z and A.
6. Press the green key or
Tip: Delete all characters by pressing the
E
yellow key. Delete only the highlighted
character by pressing the blue key.
6�5 Uninstall or reinstall
channels
1. You can uninstall a stored channel or
reinstall an uninstalled channel.
Press MENU on the remote control and
select Install > Channel installation >
Rearrange.
2. Press Æ to enter the Rearrange list.
3. Press Î or ï to select the channel you
want to uninstall or reinstall.
4. Press the green key to uninstall or reinstall
OK to finish.