Select Alternate Frequencies - Philips CEM200/98 User Manual

Item Program type Description
CHILDREN
18
19 SOCIAL
RELIGION
20
21 PHONE IN
TRAVEL
22
23 LEISURE
JAZZ
24
25 COUNTRY
NATION M
26
27 OLDIES
FOLK M
28
29 DOCUMENT Documentary
TES
30
31 ALARM

Select alternate frequencies

If the radio signal come from the current
station is poor, you can turn on the AF
(Alternate Frequency) function to let the
unit searches for another station with
stronger signal but with the same program
identification as the current station
automatically.
1
Press MENU/DISP for 3 seconds.
2
repeatedly until [AF] is
Press or
displayed.
3
Turn to select a setting:
[AF ON]: Turn on the AF mode.
•
[AF OFF]: Turn off the AF mode.
•
Set region for AF tuning
You can define AF tuning region:
[REG Only stations in the current
ON]
region can be tuned to
automatically.
[REG All stations can be tuned to
OFF] automatically.
1
Press MENU/DISP for 3 seconds.
EN
16
CEM200_98_UM_V1.0_EN.indd 16
Children's programs
Social Affairs
Religion
Phone In
Travel
Leisure
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Alarm Test
Alarm
2
repeatedly until [REG]
Press or
(Regional Radio) is displayed.
3
Turn to select a setting.
Receive traffic announcement
If you do not want to miss traffic
announcement during enjoying music, you
can turn on the TA (Traffic Announcement)
function.
1
Press MENU/DISP for 3 seconds.
2
Press or repeatedly until [TA] is
displayed.
3
Turn to select a setting:
• [TA ON]: When there is traffic
announcement, the unit switches
to the tuner mode (regardless of
the current mode) and begins to
broadcast the announcement on
traffic conditions. When the traffic
announcement is over, it returns to
the previous mode.
• [TA OFF]: Traffic announcement
does not cut in.
Set RDS clock
You can use time signal that is broadcast
together with the RDS signal to set the clock
of the unit automatically.
1
Press MENU/DISP for 3 seconds.
2
repeatedly until [CT] is
Press or
displayed.
3
Turn to select a setting:
[CT ON]: Turn on the RDS clock.
•
Time shown on the unit synchronize
with that on the RDS station.
[CT OFF]: Turn off the RDS clock.
•
Tip
•
The accuracy of the transmitted time depends
on the RDS station that transmits the time
signal.
11/11/2009 5:02:13 PM