Listen To Radio; Attach The Front Panel; Set Clock - Philips CEM5000 Quick Start Manual

2
Remove the two screws on the top of the
unit.
3
Remove the mounting sleeve with the
supplied disassembly tools.
4
Ensure that car dashboard opening is within
these measurements.
5
Install the sleeve into the dashboard and
bend the tabs outward to fi x the sleeve.
6
Place the supplied rubber cushion over the
end of the mounting bolt.
7
Slide the unit into the dashboard until you
hear a click sound.
8
Reconnect the negative terminal of the car
battery.

Attach the front panel 6

1
Attach the trim plate to the main unit.
2
Insert the right side of the panel in the
chassis until it is correctly engaged.
3
Push the left side of the panel and point the
left hole at the left pillar.
4
Release the panel to engage the left side.
5
Push the front side of the panel backward to
the main unit a "click" is heard.
Turn on
1
Press to turn on the unit.
• To turn off the unit, press
seconds.

Set clock

1
Press MENU repeatedly until [TIME
FORMAT] (time format) displays.
2
Use rotary encoder knob to toggle the
settings:
• [TIME FORMAT 12H]
• [TIME FORMAT 24H]
for 3
3
repeatedly until [CLOCK
Press or
SET] (clock set) displays.
Hour digits blinks
»
4
Set hour with rotary encoder knob.
5
Press OK / MUTE to confi rm.
Minute digits blinks
»
6
Set minute with rotary encoder knob.
7
Press to confi rm clock set and exit the
menu.

Listen to radio

1
Press SOURCE repeatedly to select [Radio] .
2
to select band: [FM1] , [FM2] ,
Press or
[FM3] , [AM1] , or [AM2] .
3
Press or
manually.
The radio station is broadcast.
»
Play with RDS
The RDS (Radio Data System) function operates
only in areas with FM stations broadcasting RDS
signals. If you tune to an RDS station, an RDS icon
and information about the presenter, station or
program is displayed.
Turn on RDS
Note
By default, the RDS function is off.
•
To adjust the RDS function, the unit
•
under Radio playback mode.
1
Press MENU for 3 seconds.
2
Rotate encoder knob to select [RDS ON] :
• To turn off the RDS function, repeat
steps above and choose [RDS OFF] .
Pairing bluetooth devices
You can pair your bluetooth device with the unit
as follows:
to tune to a radio station
must be