Table of Contents
Advertisement
Options Summary
I/O Address
Fill I/O address device is responding to. Range: 0~FFFF
Device
Select that robot should or should not do action if condition met.
In condition
Select the condition that robot should check for device.
Present - device is detected
According to register - Robot read register according to configuration.
Note: Device will be considered 'Present' by Robot, when data read from device is
not 0xFF.
Register data is
Select how robot should compare data read from register, to a value configured
below.
Chapter 3 – AMI BIOS Setup
Interface: Legacy I/O
0
is
Is not
Present
Specified register data
bitwise equal to
bytewise equal to
bytewise lesser than
bytewise larger than
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
78
Advertisement
Table of Contents
