TH-42PH9WK / TH-42PH9WS
6.5.
Removal of the HX-Board
1. Remove the HU Terminal Block.
(Reference to Removal of the HU-Board)
2. Remove the Slot Block.
(Reference to Removal of the Slot Block)
3. Remove the J-Board.
(Reference to Removal of the J-Board)
4. Remove the 2 screws and then remove the Slot Case.
5. Remove the 4 Hexagonal-Head screws and the 1 screw
and then remove the HX-Board.
6.6.
Removal of the PB-Board
1. Disconnect the couplers(PB30, PB31, PB33, PB35).
2. Remove the 1 screw and then remove the PB-Board.
6.7.
Removal of the DA-Board
1. Disconnect the couplers(PB30, PB31, PB33, PB35).
2. Remove the 2 screws and then remove the PB-Board
Block.
3. Disconnect the couplers(DA1, DA3, DA5, DA6).
4. Remove the Flexible Cable from the coupler(DA2).
5. Remove the 2 screws and then remove the DA-Board and
Fixed Plate.
Note:
A re-setup of the destination is performed by MS mode
after DA-Board exchange.
10