Hisense RC43C2GSE User's Operation Manual page 11

10. Change lower hinge part to left and front
foot fixed board to right and fix them with
screws. Then install adjustable bottom feet
parts.
Lower hinge part (left)
11.Remove the door stop (right) and door
stopper (right) with Phillips screwdrivers,
Install the door stopper(left) and door stop
(left) which are from the package of user's
manual.
1 Door stop (left)-from package of manual
2 Door stopper (left)-from package of manual
3 Self-tapping screws
4 Door stop (right)
5 Door stopper (right)
Stand the refrigerator then move lower door
and adjust its position to align lower
hole(left) site and lower hinge axis. Then
adjust middle hinge and align the middle
hinge axis to the higher (left) hole site. Then
install the middle hinge.
Note: washer may
stick to lower door.
12. Screw out top hinge axis, and flip over the
hinge body and fix the hinge axis with nut as
the picture below shows. Move upper door to
appropriate position.
OPERATION (CONTINUED)
Washer
13. Replace and Install the left upper hinge
cover on the left corner, Replace the screw
hole cover on the right corner.
14.Stand and level the appliance.
NOTE:
Before the appliance is powered, We
recommend that you should wait for about 2
hours.
9