Handlebar Adjustment - Jeep JE-C28L User Manual

HANDLEBAR ADJUSTMENT

Your bicycle's handlebars can be adjusted up and down.
Screw stem: Your bicycle is equipped with an "immersion" stem, and you can change the height by changing the
insertion of the stem in the frame pivot tube.
To adjust the height of the handlebar, loosen the clamping screw with a 6 mm hex wrench and raise or lower the stem
to the desired height.
Be careful not to exceed the minimum insertion mark. This insertion mark should never
be visible when using the bicycle.
Tighten the immersion screw, making sure that the stem is in the correct position.
14