Something Not Working; Troubleshooting - AEG Electrolux Lavamat 74900 Instruction Booklet

Something not working?

If during the spin cycle the machine makes an unusual
whistling noise, different from the noise made by tradi-
tional washing machines, this is due to a new type of
motor.
If water is not visible in the drum, this is due to the mod-
ern technology of new washing machines
that use less water than traditional machines.

Troubleshooting

If a problem arises, you can try to solve it
yourself following the instructions below.
If you call out an engineer when one of the following problems aris-
es, or to repair a fault due to incorrect use, the call-out will be
charged even if requested within the guarantee period.
During machine operation it is possible that an acoustic warning signal
sounds, the END light blinks and the following alarm codes may be dis-
played:
- E10 : problem with the water supply
- E20 : problem with water draining
- E40 : door open
- EF0 : the water safety system (AQUA ALARM) is running.
Once the problem has been eliminated, press the START PAUSE button
to restart the programme. If after all checks, the problem persists, con-
tact your local AEG/ELECTROLUX Service Force Centre.
Problem
The machine does not work
Possible cause
The main electrical fuse
has blown.
The door is not properly
closed (E40).
The plug is not connected. Insert the plug.
The START PAUSE button has not
been pressed.
The DELAY TIMER
option has been selected.
Solution
Replace the fuse.
Close the door; the click
of the lock should be heard.
Press the button.
Check the selected delay on
the display.
33