Location Of User's Control - Sampo SME-23DL3 Series Service Manual

LOCATION OF USER'S CONTROL

(ON FRONT PANEL)
Front view
RGB IN
RGB IN
INPUT
SELECT
NOTE :
1. RGB IN: Is used to Connect the RGB signal. For IBM PC and other compatibles.
3. The RGB INPUT terminals in the front and rear panels have the same function. They can connect to
the signal source (PC) simultaneously. To prevent interference, do not switch the two signal
sources (PC) on simultaneously.
MENU
DEGAUSS
STAND
VOL
BY↓ ↓ ↓ ↓
ADJUST
- 3-2-
POWER
POWER
SAVING
° ° ° °
↓ ↓ ↓ ↓
VER 1.0