Related Manuals for HENX H20XZ20-L
Summary of Contents for HENX H20XZ20-L
- Page 1 Model Name: H20XZ20-L,H20XZ20-LB USER MANUAL Original instructions WARNING: Read all safety rules and instructions carefully before operating this tool. Improper use can cause serious or fatal injury.
-
Page 2: Table Of Contents
Table of contents Before you begin…..............................3 For your safety................................4 Your appliance at a glance............................7 Operation...................................7 Cleaning and maintenance............................8 Storing, transport..............................8 Faults and remedial measures..........................9 Disposal..................................10 Technical data................................14... -
Page 3: Before You Begin
Before you begin… Intended use The appliance is intended exclusively for trimming hedges and bushes in the open air. This appliance is intended for use on private properties only. This product is not intended for commercial use. Generally acknowledged accident prevention regulations and enclosed safety instructions must be observed. - Page 4 General power tool safety warnings • Save all warnings and instructions for future reference. The term power tool in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. Work area safety • Keep the work area clean and well lit. Cluttered and dark areas invite accidents. •...
- Page 5 of untrained users. • Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. •...
- Page 6 • Cut only wood. The hedge trimmer must not be used for any purpose other than that intended. Improper use of the hedge trimmer can create dangerous situations. • The hedge trimmer may not be used for cutting lawns/lawn edges or for chopping in the sense of composting. •...
- Page 7 • Symbols located on your appliance may not be removed or covered. Replace any information on your appliance immediately that has become illegible. Residual risks Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise in connection with the tool’s construction and design: •...
- Page 8 Risks caused by vibrations Risk of injury due to vibrations! Vibrations may, in particular for persons with circulation problems, cause damage to blood vessels and/or nerves. If you notice any of the following symptoms, stop working immediately and consult a doctor: numbness of body parts, loss of sense of feeling, itching, pins and needles, pain, changes in skin colour.
-
Page 10: Your Appliance At A Glance
Your appliance at a glance Note: The actual appearance of your product may differ from the illustrations. 1. Cutting device 2. Hand guard 3. Front trigger 4. Front handle 5. Rear handle 6. Rear trigger 7. Battery pack 8. Control lights 9. - Page 11 Install or remove the battery pack Notice: ► Hold the tool and battery when installing or removing the battery pack. Failing to hold the tool and battery pack tightly may cause them to slip from your hand, damage the tool and battery pack, and cause personal injury.
-
Page 12: Cleaning And Maintenance
Cut the hedge to the desired height. 2. Trim the side of the hedge diagonally from bottom to top. Round off the upper corners of the hedge. Cut back the hedge somewhat at ground level. Cleaning and maintenance DANGER! Risk of injury! Before any maintenance or cleaning work:Remove the battery. -
Page 13: Disposal
When something isn’t working… DANGER! Risk of injury! Improperly performed repairs can lead to the device not functioning safely. This endangers yourself and your environment. Fault/malfunction Cause Remedial measure Device does not work. Battery not slotted in correctly? Slot battery into place. ►... -
Page 14: Technical Data
Malfunctions are often caused by minor faults. You can easily remedy most of these yourself. Please consult the following table before contacting the vendor. You will save yourself a lot of trouble and possibly money too. Technical data Item number Cordless hedge trimmer Cutting length 510 mm... - Page 15 30 days from date of original purchase. HENX will replace, at its discretion, any part that is proven to be defective in materials or workmanship under normal use during the warranty period. Warranty replacements will be made without charge for parts or labor.
- Page 16 Warranty does not extend to HENX Hedge Trimmer damaged or affected by accidents, neglect, misuse, contaminated fuel, unauthorized alterations, use in applications beyond product design and any other modification, In addition, this warranty does not cover general check-ups on electrical equipment, tune-ups on...
Need help?
Do you have a question about the H20XZ20-L and is the answer not in the manual?
Questions and answers