Seat Sound System 1.0 Owner's Manual page 22

Inserting a CD
● Hold the CD with the printed side facing up.
⇒ f ig. 1
● Push the CD into the CD slot
drawn in automatically.
● When the CD is inserted, the play function will start automatically.
When other functions are selected,
CD-IN
screen if a CD is inserted in the internal CD drive.
Ejecting CDs
● Press the unit button.
EJECT
● The CD in the drive will be ejected and must be removed within 10 sec-
onds.
If the CD is not removed within 10 seconds, it is retracted again for safety
reasons.
Error messages on the screen
A reading error is indicated by ERROR
An error message in the bottom line of the screen indicates the possible
cause of the error.
Message Meaning and consequences
NO CD No compatible data medium.
It is not possible to switch to Media mode.
CD ROM Data CD inserted.
CD will be ejected.
The inserted CD cannot be read.
CHECK CD
CD will be ejected.
Check for damage.
only to the point where it is
4
is displayed at the top left of the
in the title bar.
Message Meaning and consequences
TEMPERATURE CD drive is too hot.
CD playback is disabled.
Another audio source will be played.
SERVICE Mechanical fault in the CD drive.
Contact a specialised workshop.
Note
Uneven road surfaces and strong vibrations may cause the CD to jump.
Selecting a media source
When you switch to Media mode, the available media sources are displayed
for roughly 5 seconds in the bottom line of the screen. The media source
currently playing is underlined on the display
Opening the Media selection menu manually and selecting a media source
● In Media mode, briefly press the
⇒ f ig.
selection menu again 18.
● Select the desired media source by pressing its function button.
● Alternatively: Press the unit button as often as required to switch
MEDIA
between the available media sources.
Audio mode
Fig. 18 Media selec-
tion menu: CD being
played from the inter-
nal CD drive.
⇒ f ig.
18.
unit button to display the Media
MEDIA
21

