Seat Sound System 1.0 Owner's Manual page 18

TP function activated
While traffic news monitoring is switched on and enabled,
⇒ f ig.
12.
In radio mode, the selected station must support the TP function. If a sta-
tion selected via the station buttons or manual tuning does not support the
TP function, traffic news monitoring is not possible (display:
If the currently selected traffic news station can no longer be received,
NO TP is also displayed and you will need to start a manual station search
⇒ p age 13.
using the arrow buttons and
 
During a station search with the arrow buttons or the scan function (SCAN),
the unit will only tune to stations that support the TP function.
In media mode or while the unit is muted, the unit will always automatically
tune to a traffic news station in the background, provided a TP station is
available. This may take some time depending on the situation.
Incoming traffic announcement (INFO)
An incoming traffic announcement (display:
⇒ f ig.
audio mode 13.
TP is displayed
).
NO TP

Fig. 13 Incoming traf-
fic announcement.
) will interrupt the active
INFO
● If required, the radio is switched to the traffic news station (EON) for the
duration of the traffic announcement.
● The Media mode will be paused and the volume will be adjusted to the
preset level.
● During a traffic announcement, the traffic announcement volume setting
can be adjusted with the volume control . The adjusted setting will be ap-
plied to subsequent announcements.
● Interruption by a traffic announcement can be stopped by pressing the
unit button. The TP function remains active and the next traffic an-
TP
nouncement will again interrupt the current Audio mode.
Audio mode 17
