Table of Contents
Advertisement
Show RDS information
Radio Data System (RDS) is a service
that allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon and the station name are displayed.
1
Tune to an RDS station.
2
Press RDS repeatedly to scroll through the
following information (if available):
» Station name
» Program type such as [NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
» RDS clock
» Frequency
Synchronize clock with RDS
You can synchronize time shown on the unit
with that on the RDS station.
1
Tune to an RDS radio station that
transmits time signals.
2
Press RDS for over 2 seconds.
» [CT SYNC] is displayed and the unit
reads RDS time automatically.
» If no time signal is received, [NO CT]
is displayed.
Note
•
The accuracy of the transmitted time depends on the
RDS station that transmits the time signal.
EN
18
7 Other features
Set sleep timer
When the unit is turned on, press
SLEEP/TIMER repeatedly to select a time
period (in minutes).
» When sleep timer is activated,
displayed.
•
To deactivate sleep timer, press
SLEEP/TIMER again until
disappears.
Set alarm timer
This unit can be used as an alarm clock. You can
select CD, iPod/iPhone/iPad, playlist, FM, or USB
as alarm source.
Note
•
Make sure that you have set the time correctly.
1
In standby mode, press and hold SLEEP/
TIMER until [TIMER SET](timer set) scrolls
on the display.
» [SELECT SOURCE] (select source)
scrolls on the screen.
2
Press SOURCE repeatedly to select a
source: DISC, USB, TUNER, iPod/iPhone/
iPad or playlist.
•
If iPod/iPhone/iPad playlist is selected
as the alarm source, you need create
a playlist called "PHILIPS" in your
iPod/iPhone/iPad.
•
If no playlist called "PHILIPS" is created
in the iPod/iPhone/iPad or no track is
stored in the playlist, the unit switches
to TUNER alarm source.
3
Press SLEEP/TIMER to confirm.
» The hour digits are displayed and begin
to blink.
is
Advertisement
Table of Contents
