Select A Preset Radio Station; Show Rds Information - Philips BTB2465 User Manual

3
Press OK to select an option, and then
press /MENU to exit the menu.
4
In FM tuner mode, press and hold
CLOCK/SCAN.
» The stations scanned are based on the
selection in step 2.
» The unit broadcasts the first scanned
FM radio stations.
Store FM radio stations manually
1
Tune to an FM radio station.
2
Press PROG to activate programming
mode.
» [PROG] (program) blinks.
3
Press ALBUM/PRESET
to select a radio frequency.
4
Press PROG again to confirm.
» The frequency of the preset station is
displayed.
5
Repeat the above steps to store more FM
stations.
Note
•
To remove a pre-stored station, store another station
in its place.

Select a preset radio station

• In FM mode, press ALBUM/PRESET
to select a stored radio frequency, and
then press OK to confirm.

Show RDS information

Radio Data System (RDS) is a service
that allows FM stations to show additional
information.
1
Tune to an RDS station.
2
Press INFO repeatedly to scroll through
the following information (if available).
14 EN
/ repeatedly
/
• Radio text message
• Program type
• Frequency
• Stereo/Mono
• Time
Select stereo/mono broadcast
Note
•
Stereo broadcast is the default setting for tuner mode.
•
For stations with weak signals: to improve the reception,
change to monaural sound.
• In FM tuner mode, press OK to switch
between mono and stereo broadcast.
» [ST] (Stereo) is displayed when the
radio station is stereo broadcast.