Operating The Detector - Canon AX-B2735W Manual

4
Operating procedures
When inserting the battery cover, make sure it does not have a bulge in the
middle. If there is a bulge, water resistance will deteriorate. Check the shape of
the battery cover, and if the inside of the cover has warped into a curved shape,
replace it with a new battery cover.
Make sure that the battery cover is inserted fully.
Make sure that the battery cover is locked securely.
The remaining battery pack charge is indicated by the Power LED lamps of the
detector when the detector is turned on.
Remaining
* Exposure is not possible when the remaining battery level is 0% to 4%, as indicated by flashing.
4.2

Operating the detector

1
Turn on the detector.
Press and hold the POWER switch
(for at least 0.5 seconds).
Power LED lights up.
32
Important
Information
Information
Information
Power
LED
battery 76% to 100% 51% to 75% 26% to 50%
charge
( : Lighted up, : Flashing (1 sec. cycles),
Power LED
READY LED
5% to 25% 0% to 4%*
POWER switch
: Off)