Warranty - Mitsubishi Electric M800 Series Manual

WARRANTY

WARRANTY
Please confirm the following product warranty details before using MITSUBISHI CNC.
1. Warranty Period Mitsubishi Electric's approval
and Coverage (c) a failure which may be regarded as avoidable,
if the customer's equipment in which this
Should any fault or defect (hereafter called
product is incorporated is equipped with a
"failure") for which we are liable occur in this
safety device required by applicable laws or has
product during the warranty period, we shall
any function or structure considered to be
provide repair services at no cost through the
indispensable in the light of common sense in
distributor from which the product was
the industry
purchased or through a Mitsubishi Electric
(d) a failure which may be regarded as avoidable
service provider. Note, however that this shall
if consumable parts designated in the instruction
not apply if the customer was informed prior
manual, etc. are duly maintained and replaced
to purchase of the product that the product
(e) any replacement of consumable parts
is not covered under warranty. Also note that
(including a battery, relay and fuse)
we are not responsible for any on-site
(f) a failure caused by external factors such as
readjustment and/or trial run that may be
inevitable accidents, including without limitation
required after a defective unit is replaced.
re and abnormal uctuation of voltage, and
acts of God, including without limitation
[Warranty Term]
earthquake, lightning, and natural disasters
The term of warranty for this product shall be
(g) a failure which is unforeseeable under
twenty-four (24) months from the date of delivery
technologies available at the time of shipment of
of product to the end user, provided the product
this product from our company
purchased from us in Japan is installed in Japan
(h) any other failures which we are not
(but in no event longer than thirty (30) months,
responsible for or which the customer
Including the distribution time after shipment
acknowledges we are not responsible for
from Mitsubishi Electric or its distributor).
Note that, for the case where the product
2. Service in Overseas
purchased from us in or outside Japan is
Countries
exported and installed in any country other
than where it was purchased; please refer
If the customer installs the product
to "2. Service in overseas countries" as will
purchased from us in his/her machine or
be explained.
equipment, and export it to any country
other than where he/she bought it, the
[Limitations]
customer may sign a paid warranty
(1) The customer is requested to conduct an
contract with our local FA center.
initial failure diagnosis by him/herself, as a
This falls under the case where the product
general rule. It can also be carried out by us or
purchased from us in or outside Japan is
our service provider upon the customer's
exported and installed in any country other
request and the actual cost will be charged.
than where it was purchased.
(2) This warranty applies only when the
For details please contact the distributor
conditions, method, environment, etc., of use
from which the customer purchased the
are in compliance with the terms and conditions
product.
and instructions that are set forth in the
instruction manual, user's manual, and the
caution label af xed to the product, etc.
3. Exclusion of Responsibility
(3) Even during the term of warranty, repair costs
for Compensation against
shall be charged to the customer in the following
Loss of Opportunity,
cases:
Secondary Loss, etc.
(a) a failure caused by improper storage or
handling, carelessness or negligence, etc., Whether during or after the term of warranty,
or a failure caused by the customer's we assume no responsibility for any
hardware or software problem damages arising from causes for which we
29
(b) a failure caused by any alteration, etc., to the a re n o t re s p o n s i b l e , a n y l o s s e s o f
product made by the customer without opportunity and/or pro t incurred by the
customer due to a failure of this product, any
d a m a g e s , s e c o n d a r y d a m a g e s o r
compensation for accidents arising under
speci c circumstances that either foreseen
or unforeseen by Mitsubishi Electric, any
damages to products other than this
p r o d u c t , o r c o m p e n s a t i o n f o r a n y
replacement work, readjustment and startup
test run of on-site machines or any other
operations conducted by the customer.
4. Changes in Product
Specifications
Speci cations shown in our catalogs,
manuals or technical documents are
subject to change without notice.
5. Product Application
(1) For the use of this product, its applications
should be those that may not result in a serious
damage even if any failure or malfunction occurs
in the product, and a backup or fail-safe function
should operate on an external system to the
product when any failure or malfunction occurs.
( 2 ) M i t s u b i s h i C N C i s d e s i g n e d a n d
manufactured solely for applications to machine
tools to be used for industrial purposes.
Do not use this product in any applications other
than those speci ed above, especially those
which are substantially in uential on the public
interest or which are expected to have signi cant
in uence on human lives or properties.
* Trademarks
MELDAS, MELSEC, EZSocket, EZMotion, iQ
Platform, MELSOFT, GOT, CC-Link, CC-Link/LT
a n d C C - L i n k I E a re e i t h e r t r a d e m a r k s o r
registered trademarks
of Mitsubishi Electric Corporation in Japan
and/or other countries.
Ethernet is a registered trademark of Xerox
Corporation in the United States and/or other
countries.
Microsoft ® and Windows ® are either trademarks
o r r e g i s t e r e d t r a d e m a r k s o f M i c r o s o f t
Corporation in the United States and/or other
countries.
SD logo and SDHC logo are either registered
trademarks or trademarks of LLC.
Other company and product names that appear
in this manual are trademarks or registered
trademarks of the respective companies.
YOUR SOLUTION PARTNER
Mitsubishi Electric offers a wide range of automation equipment from PLCs and HMIs to
CNC and EDM machines.
A NAME TO TRUST
Since its beginnings in 1870, some This is why you can rely on Mitsubishi
45 companies use the Mitsubishi E l e c t r i c a u t o m a t i o n s o l u t i o n -
n a m e , c o v e r i n g a s p e c t r u m o f because we know rst hand about
nance, commerce and industry. t h e n e e d f o r r e l i a b l e , e f c i e n t ,
easy-to-use automation and control in
T h e M i t s u b i s h i b r a n d n a m e i s our own factories.
recognized around the world as a
symbol of premium quality. A s o n e o f t h e w o r l d 's l e a d i n g
companies with a global turnover of
Mitsubishi Electric Corporation is over 4 trillion Yen (over $40 billion),
a c t i v e i n s p a c e d e v e l o p m e n t , employing over 100,000 people,
transportation, semi-conductors, Mitsubishi Electric has the resource
energy systems, communications and and the commitment to deliver the
information processing, audio visual ultimate in service and support as well
equipment and home electronics, as the best products.
building and energy management and
automation systems, and has 237
factories and laboratories worldwide
in over 121 countries.
YOUR SOLUTION PARTNER
Low voltage: MCCB, MCB, ACB
Medium voltage: VCB, VCC
Power monitoring, energy management
Compact and Modular Controllers
Inverters, Servos and Motors
Visualization: HMIs, Software, MES connectivity
Numerical Control (NC)
Robots: SCARA, Articulated arm
Processing machines: EDM, Lasers, IDS
Air-conditioning, Photovoltaic, EDS
30