Rear Panel Of The Sound Tower - Samsung MX-ST90B Full Manual

Rear Panel of the Sound Tower

AUX 1
ECHO 1
Bluetooth

PAIRING

ADD STEREO

GROUP PLAY

AUX1

ECH01

VOL1

MIC1
GROUP PLAY IN

Terminals
GROUP PLAY OUT

Terminals

MIC2

VOL2

ECHO2
USB1 USB2
VOL 1 MIC 1 MIC 2 VOL 2 ECHO 2 (5V 2.1A) (5V 0.5A)
POWER
Press the PAIRING button to enter pairing mode, "PAIRING" LED on the rear
plane will blink quickly.
Press the ADD STEREO button to connect to another same model Sound Tower
wirelessly.
Press the GROUP PLAY button to connect up to ten Sound Tower systems
wirelessly.
Use an Audio (AUX) Cable (not supplied) to connect AUX1 jack on the main unit to
Audio Out on an external device.
You can give an echo effect to the sound from a connected microphone (MIC1) by
adjusting the ECH01 knob.
Use the VOL1 knob on the main unit to adjust the volume of a connected
microphone (MIC1).
Connect your microphone to the MIC1 jack.
Use an Audio Cable (not supplied) to connect AUX2 (IN) terminals on the main unit
to Audio Out on an external analog output device.
Use an Audio Cable (not supplied) to connect GROUP PLAY (OUT) terminals on the
main unit to GROUP PLAY(IN) on another Sound Tower.
Connect your microphone to the MIC2 jack.
Use the VOL2 knob to adjust the volume of a connected microphone (MIC2).
You can give an echo effect to the sound from a connected microphone (MIC2) by
adjusting the ECHO2 knob.
 
AUX 1
ECHO 1 VOL 1 MIC 1 MIC 2
   
 


ENG - 6

USB1 USB2
(5V 2.1A) (5V 0.5A)
VOL 2 ECHO 2