Samsung MX-ST90B Full Manual page 20

Using Stereo Mode with a Samsung TV
Connect two Sound Towers and use them with a Samsung TV to enjoy stereo mode, to cover a larger
listening area or to hear greater left and right audio separation.
Precondition
• To use the Stereo mode, both Sound Tower systems must be the same model.
• When connecting a Sound Tower or TV, make sure it is within 3.28 ft (1 m) distance.
• Cannot set to Stereo Mode with Samsung TV if the Sound Tower is already connected to a TV via
Bluetooth.
• If the sound tower is in Group Play mode, need to exit it before using Stereo mode.

Left Sound Tower
(MAIN)
Connect two sound towers via stereo mode by pressing the ADD STEREO button on the two Sound

Towers.
In "BT" mode, press the "AUX" button on the MAIN Sound Tower remote control for at least 5

seconds. The LED blinks on the ADD STEREO button.
Connect a RCA cable to the OUT(Group Play) on the MAIN and AUX2 IN on the SUB as shown.

• When the connection is complete, the "ADD STEREO" LED will stop blinking and turn solid, the
speakers will beep, and the AUX2 LED on the SUB will turn on.
• The MAIN Sound Tower outputs the left channel sound and the SUB Sound Tower outputs the
right channel sound. Press the ADD STEREO button on the MAIN or SUB Sound Tower to swap
them between Left and Right.
• Connect a TV and MAIN Sound Tower via Bluetooth to play audio. Sound is output from both
Sound Towers.

LIGHT
PAIRING
SOUND
MODE
EFFECT
DOWN
Right Sound Tower
(SUB)

White LED on
USB AUX
TEMPO
EFFECT
DJ
UP
Left Sound Tower
ENG - 14
Right Sound Tower
(MAIN) (SUB)
AUX2 white LED on