Download Print this page
Global Industrial 320777 User Manual

Global Industrial 320777 User Manual

Portable sandblaster 20 gallons

Advertisement

Quick Links

User's manual
Customer Service
US: 1-800-645-2986
DANGER
• CHEMICALS SUCH AS LEAD ARE FOUND IN CORD AND SAND
BLASTER. BE SURE TO WASH HANDS AFTER USE.
• ALWAYS WEAR PROTECTION AND RATED GEARS SUCH AS
GLOVES, GOGGLES, AND MASK WHILE OPERATING SAND
BLASTER.
• DO NOT OPERATE SAND BLASTER NEAR OR AROUND
COMBUSTIBLE AND/OR FLAMMIBLE LIQUIDS, GASES,
OILY RAGS, OR COMBUSTIVE MATERIAL. SPARKING CAN
OCCUR WHILE SAND BLASTING, WHICH COULD RESULT
IN FIRE OR EXPLOSIONS.
• ENSURE OPERATOR IS GROUNDED AND WEARS PROPER
ANTI-STATIC GEAR.
Manual del usuario
Servicio de atención al Cliente
US: 1-800-645-2986
Portable Sandblaster
20 Gallons
Model(s): 320777
MODEL
MAX.
Air Inlet
WORK
NPT(F)
PRESSURE
(PSI)
320777
125
Connector
NOTE
• INSPECT ITEM CAREFULLY FOR MISSING PARTS OR DAMAGE.
• DO NOT USE SANDBLASTER IF ANY PARTS ARE
MISSING,BROKEN, OR DAMAGED
• INSPECT FITTINGS AND CONNECTIONS BEFORE OPERATING.
• ENSURE OPERATOR READS AND UNDERSTANDS MANUAL
PRIOR TO OPERATION.
• CONDUCT NECESSARY MAINTANANCE TO SANDBLASTER
WHEN REQUIRED.
• FOR OPTIMAL PERFORMACE, AVOID USING SANDBLASTER IN
DAMP AND WET AREAS.
• KEEP CHILDREN AWAY FROM SANDBLASTER.
• DISCONNECT AIR COMPRESSOR WHEN SANDBLASTER IS NOT
IN USE.
1
Manuel de l'utilisateur
Service à la clientèle
Canada: 888-645-2986
Hopper
Min. Hose
Capacity
Size
(lbs)
Quick
90
3/8

Advertisement

loading
Need help?

Need help?

Do you have a question about the 320777 and is the answer not in the manual?

Questions and answers

Summary of Contents for Global Industrial 320777

  • Page 1 Manual del usuario Manuel de l'utilisateur Customer Service Servicio de atención al Cliente Service à la clientèle US: 1-800-645-2986 Canada: 888-645-2986 US: 1-800-645-2986 Portable Sandblaster 20 Gallons Model(s): 320777 MODEL MAX. Air Inlet Hopper Min. Hose WORK NPT(F) Capacity Size...
  • Page 2 User's Manual Part List Description QTY. D 12 mm x L 400 mm Axle Axle Support Bracket 5" x 1.5" Inch Plastic Wheels ID 13 mm M12 flat washer 4 x 36 mm Cotter Pin M8 x 12 hex bolt L 580 mm Air Hose G3/8"-M14 x 1.5 Brass Nipple Pipe Joint...
  • Page 3 Assembly Instructions 1. Connect tank foot (Ref 24) to tank 4. Insert axle (Ref 1) through the (Ref 23) using cotter pin (Ref 5). support brackets and assemble the other wheel assembly.. 5. Attach hose clamp (Ref 27) and 2. Connect axle support bracket (Ref 2) abrasive hose (Ref 25) to tee joint to tank (Ref 23) using hex bolt (Ref 6).
  • Page 4 Operating Instructions 7. Place rubber seal (Ref Operation 16) on top of tee handle 1. Keep operating air pressure between (Ref 15) and insert into 60~125 PSI. tank. DO NOT EXCEED 125 PSI. 2. Ensure that the abrasive material being used is compliant and operational with this item's capabilities.