Download Print this page
Global Industrial 320776 User Manual

Global Industrial 320776 User Manual

Portable sandblaster 5 gallons

Advertisement

Quick Links

User's manual
Customer Service
US: 1-800-645-2986
DANGER
• CHEMICALS SUCH AS LEAD ARE FOUND IN CORD AND SAND
BLASTER. BE SURE TO WASH HANDS AFTER USE.
• ALWAYS WEAR PROTECTION AND RATED GEARS SUCH AS
GLOVES, GOGGLES, AND MASK WHILE OPERATING SAND
BLASTER.
• DO NOT OPERATE SAND BLASTER NEAR OR AROUND
COMBUSTIBLE AND/OR FLAMMIBLE LIQUIDS, GASES,
OILY RAGS, OR COMBUSTIVE MATERIAL. SPARKING CAN
OCCUR WHILE SAND BLASTING, WHICH COULD RESULT
IN FIRE OR EXPLOSIONS.
• ENSURE OPERATOR IS GROUNDED AND WEARS PROPER
ANTI-STATIC GEAR.
Manual del usuario
Servicio de atención al Cliente
US: 1-800-645-2986
Portable Sandblaster
5 Gallons
Model(s): 320776
MODEL MAX.
320776
Specificaitons
Air Inlet
WORK
NPT(F)
PSI
Quick
125
Connector
NOTE
• INSPECT ITEM CAREFULLY FOR MISSING PARTS OR DAMAGE.
• DO NOT USE SANDBLASTER IF ANY PARTS ARE
MISSING,BROKEN, OR DAMAGED
• INSPECT FITTINGS AND CONNECTIONS BEFORE OPERATING.
• ENSURE OPERATOR READS AND UNDERSTANDS MANUAL
PRIOR TO OPERATION.
• CONDUCT NECESSARY MAINTANANCE TO SANDBLASTER
WHEN REQUIRED.
• FOR OPTIMAL PERFORMACE, AVOID USING SANDBLASTER IN
DAMP AND WET AREAS.
• KEEP CHILDREN AWAY FROM SANDBLASTER.
• DISCONNECT AIR COMPRESSOR WHEN SANDBLASTER IS NOT
IN USE.
1
Manuel de l'utilisateur
Service à la clientèle
Canada: 888-645-2986
Hopper
Min. Air
Capacity
Hose Size
(lbs)
OD 10mm x ID
37
6.5mm (1/4") x
L 530mm

Advertisement

loading
Need help?

Need help?

Do you have a question about the 320776 and is the answer not in the manual?

Questions and answers

Summary of Contents for Global Industrial 320776

  • Page 1 Manual del usuario Manuel de l'utilisateur Customer Service Servicio de atención al Cliente Service à la clientèle US: 1-800-645-2986 Canada: 888-645-2986 US: 1-800-645-2986 Portable Sandblaster 5 Gallons Model(s): 320776 Specificaitons MODEL MAX. Air Inlet Hopper Min. Air WORK NPT(F) Capacity Hose Size...
  • Page 2 User's Manual Part List Description QTY. 4 x 36 mm Cotter Pin M13 Flat Washer 6" x 1.5" Inch Plastic Wheels ID 13.5 mm D 12 mm x L 344 mm Wheel Axel Axle Bracket Tank M6 Flat Washer M6 x 35 mm Screw M6 Nut OD 45mm x D 5 mm O-Ring...
  • Page 3 Assembly Instructions 4. Connect airhose (Ref 20) from tank to tee air manifold (Ref 18). 1. Insert axle bracket (Ref 5) into both ends of the wheel axle (Ref 4). Ensure that fastening holes on axle bracket point outwards. 2. Insert cotter pin (Ref 1). washer (Ref 2), wheel (Ref 3), washer, and cotter 5.
  • Page 4 Operating Instructions 7. Attach abrasive hose Operation (Ref 20) to tank using 1. Keep operating air pressure between hose clamp (Ref 29). 60~125 PSI. DO NOT EXCEED 125 PSI. 2. Ensure that the abrasive material being used is compliant and operational with this item's capabilities.