Accsoon CineView SE User Manual page 18

1. Please make sure the transmitter and receiver are set
to the same group.
2. Please check that the antennas are securely mounted.
1. Please check whether the SDI/HDMI cable of the camera is
correctly plugged into the SDI/HDMI IN port of the transmitter.
2. Please check if the video format and other information is
shown on the display interface; if not, please check the SDI/HDMI
cable and see if the SDI/HDMI of the camera has video output.
3. Please check if the SDI/HDMI video format of the camera is
compatible with the formats supported by the product.
Choppy video
1. Please check that the antennas are securely mounted.
2. Please make sure there are no metals or cables around the
antennas that can cause signal blocking.
3. Please switch to another channel manually.
Mobile devices can't connect to
1. CineView SE has two WiFi signals, one is 2.4G and another is 5G.
Please confirm that you are connected to "Accsoon_****".
App fails to find the latest firmware
1. Please check if the WiFi connection of your mobile device can
access the internet properly.
2. Please check if the mobile device has automatically connected to
the CineView SE's WiFi signal. If so, please change the WiFi
connection line and try again.
3
SE
CineView