Oled Display; Data Rate Setting; Channel Setting - Accsoon CineView SE User Manual

Instruction

OLED Display

4
Connection Status:
Transmitter: the number of connected devices; "0" if none connected.
Receiver: "1" when connected to the transmitter; otherwise "0".

Data Rate Setting

5
How to:
Press the menu button to access "Data Rate Setting" → Press the left and
right buttons to select → Press the menu button to activate the setting.

Channel Setting

6
1. Only the transmitter has the "Channel Setting" menu.
2. The default channel setting is Auto (A). CineView SE will automatically
select the channel with the least interference when it is powered on.
(Note: It is recommended that users do not change this setting.)
3. If the user needs to change the channel, please: Press the menu
button to enter "Channel Setting" → Press the left and right buttons to
select → Press the menu button to confirm → Select "Yes" → Press the
menu button to confirm and the setting will take effect after reboot.
Current group
Input audio information
Input video information
Battery level/DC input
Connection status
Current channel
6