● No Fan Design ● Latency Less Than 0.06s ● Powered by NP-F Battery or USB-C ● 1 Transmitter for 4 Devices ● Wireless Remote Monitoring App Accsoon SEE ● Long-Distance Transmission of 500ft/150m ● Automatic Channel ● Removable Phone Clamp ●...
Application Monitoring on Up to 4 Devices Camera/Camcorder CineView Nano 3. Use an NP-F970/F750/F550 battery or USB-C to power the CineView Nano. Android/iOS Android/iOS Android/iOS Android/iOS 4. Connect camera HDMI to (APP) (APP) (APP) (APP) CineView Nano. Instruction How to Install Install the CineView 1.
Page 6
Livestream via Accsoon App App download Accsoon SEE Open Accsoon App and tap �Live� → Enter streaming RTMP URL and code → Tap �Go Live�. Please download the App - Accsoon SEE from Google Play Store or iOS App Store.
Page 7
Press for 3 seconds, then wait for all indicator lights to turn off 1. Make sure the battery level of CineView Nano is above 50% before updating. for an additional 3 seconds. 2. No power cuts should occur during the upgrade process.
2. You will get detailed solutions from authorized dealers or Temperature Accsoon. Dimensions 76mm × 113mm × 20mm 3. Accsoon reserves the right to review the damaged product. Safety Information Weight 72.3g Warranty Policy • When operating this equipment, read and follow all the instructions in this manual.
2. Please check if the mobile device has automatically connected to the CineView Nano�s WiFi signal. If so, please change to another WiFi connection that can access the internet properly and try again. 04 The mobile device fails to detect/search for the WiFi SSID 1.