Downmix; Digital Audio - Philips DVP3110/93 User Manual

Dvd video player
Hide thumbs Also See for DVP3110/93:
Table of Contents

Advertisement

Downmix

This option allows you to set the stereo
analog output of your DVD player.
A
In 'Audio Setup Page', press
select { Downmix }, then press
{ Stereo }
Select this option when output delivers
sound from only the two front speakers.
{ LT/RT }
Select this option if your DVD player is
connected to a Dolby Pro Logic decoder.
B
Use
to select a setting and press
OK to confi rm.

Digital Audio

The options included in Digital Audio are:
{Digital Output} and {LPCM Output}.
A
In 'Audio Setup Page', press
select { Digital Audio }, then press
B
Press
to select an item, then press
to access.
C
Use
to select a setting and press
OK to confi rm.
TIPS:
The underlined option is the factory default setting.
Press
to go back to previous menu item. Press SETUP to exit the menu item.
01-39_dvp3110_93_eng1.indd 29
01-39_dvp3110_93_eng1.indd 29
DVD Menu Options
Digital Output
Set the Digital Output according to your
optional audio equipment connection.
{ All }
to
Select this if the connected device has a
.
built-in multichannel decoder that
supports one of the multichannel audio
format (Dolby Digital, MPEG-2).
{ PCM Only }
Select this if the connected device is not
capable of decoding multichannel audio.
The DVD player will convert the Dolby
Digital and MPEG-2 multichannel signals
to PCM (Pulse Code Modulation).
{ SPDIF Off }
To deactivate the digital audio output.
For example, if you use the AUDIO OUT
sockets to connect to a TV or stereo
system.
to
.
LPCM Output
If you connect the DVD player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust 'LPCM Output'.
{ 48K }
Playback a disc recorded at the sampling
rate of 48kHz.
{ 96K }
Playback a disc recorded at the sampling
rate of 96kHz. This rate can only be
achieved in Stereo-Classic (Flat) mode.
Tip:
– Discs are recorded at a certain sampling
rate. The higher the sampling rate, the better
sound quality. LPCM Output can be selected
only when PCM Only is activated.
(continued)
29
2007-01-12 4:02:28 PM
2007-01-12 4:02:28 PM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvp3110

Table of Contents