Table of Contents
Advertisement
7. Do not install or handle wet modules.
8. Do not touch the exposed cables or connectors.
9. Do not artificially concentrate sunlight on the solar modules.
4
|
ENVIRONMENTAL CONDITIONS INFORMATION
4.1. ENVIRONMENTAL CONDITIONS
Only Install the PV modules within the following conditions:
1. Ambient temperature: -40°C to 40°C
2. Operating temperature: -40°C to 85°C
3. Storage temperature: -30°C to 50°C
4. Humidity: <85RH%
5. Keep modules away from inflammable gas, hazardous chemicals, or fire sources.
4.2. SITE INSTALLATION
1. To ensure the modules receive the most sunlight exposure, position the modules in a manner to minimize
the chances of shading throughout the day by trees, buildings, or any other surrendering objects.
2. Solar modules should normally be mounted facing the equator at an angle to the horizontal plane equivalent
to the latitude of the installation for optimum energy generation. The module tilt angle is measured between
the solar modules and the horizontal (Figure 1). Any slope less than 5in/ft(127mm/305mm) is required
to maintain a fire class rating. The PV module generates maximum output power when it faces the sun directly.
3. Do not install modules in the location where they will be immersed in water or continually exposed to water
from a sprinkler, hose, or fountain.
4. Please leave a safe working area between the edge of the roof and the external edge of the solar array when
installing modules on a roof.
5. Avoid a mounting method that will block the drainage holes in the module frame.
04
Advertisement
Table of Contents
