DivX subtitles do not display correctly.
•
Ensure that the subtitle À le name is the
same as the movie À le name.
•
Select the correct character set: 1) Press
OPTIONS /
( Options ). 2) Select
[Character Set] . 3) Select the supported
character set. 4) Press OK .
The contents of a USB storage device cannot be
read.
•
Ensure that the format of the USB storage
device is compatible with the home theater
(see 'Product speciÀ cations' on page 24 ) .
•
Ensure that the USB storage device
is formatted with a À le system that is
supported by the home theater.
'No entry' or 'x' sign appears on the TV.
•
The operation is not possible.
EasyLink feature does not work.
•
Ensure that the home theater is connected
to a Philips brand EasyLink TV and that
EasyLink is on .
I do not want my home theater to be switched
on when I switch on my TV.
•
This is the correct behavior for Philips
EasyLink (HDMI-CEC). To make the home
theater work independently, switch off
EasyLink .
I cannot access BD-Live features.
•
Check the network connection (see
'Connect to a computer network and
the Internet' on page 12 ) or ensure that
the network has been set up (see 'Set up
network' on page 12 ) .
•
Clear memory storage. (see 'Change
advanced settings' on page 22 )
•
Ensure that the Blu-ray disc supports BD-
Live feature.
The video (movies, photos, video clips, etc.)
contents of the iPod/iPhone do not display on TV.
•
Video and photo browsing is not supported,
you can only browse the video and photo
contents on the iPod/iPhone itself.
Cannot see pictures from my iPod/iPhone on the
TV.
•
Connect a yellow composite cable from the
dock to the TV.
•
Switch the TV to the AV/VIDEO source
(corresponding to the yellow composite
cable).
•
Press PLAY on the iPod or iPhone to start
the slideshow.
The audio is interrupted when I play music from
my iPod or iPhone in the docking station.
•
Ensure that you have installed the latest
À rmware on your iPod or iPhone. For more
information, refer to the support website of
your iPod or iPhone.
My 3D video plays in 2D mode.
•
Ensure that your home theater is connected
to your 3D TV through HDMI.
•
Ensure that your disc is a Blu-ray 3D disc.
•
Ensure that the [Blu-ray 3D video] setting
is turned on (see 'Change video settings' on
page 20 ) .
I see black video on my TV screen.
•
Ensure that your home theater is connected
to the TV through HDMI.
•
Switch to the correct HDMI source on your
TV.
Network
Wireless network not found or distorted.
•
Ensure that the wireless network is not
disturbed by the microwave ovens, dect
phones or other Wi-Fi devices in your
neighbourhood.
•
Try the wired network installation if the
wireless network does not work properly
(see 'Set up network' on page 21 ) .
EN
27