Play A Disc - Philips HTS5220/12 Manual

Sound Description
experience
AUTO Sets a constant output signal at
VOLUME the speaker output. This option
is best for TV audio input
where the commercial signal
level is usually higher than the
content.
SOUND Selects a sound mode.
SURROUND Selects a surround sound or
stereo sound.
TREBLE Adjusts the high frequency
output.
MID Adjusts the middle frequency
output.
BASS Adjusts the low frequency
output.
AUDIO SYNC Delays the audio to match the
video.
3
Select an option, then press OK .
4
Press BACK to exit.
If you do not press a button within À ve seconds,
it automatically exits the menu.
Change auto volume
Select the level of volume which output from
your TV or other devices to the home theater.
1
Press SOUND SETTINGS /
options ).
2
Select AUTO VOLUME , then press OK .
3
Press the Navigation buttons (up/down) to
select ON or OFF .
4
Press OK to conÀ rm your choice.
Change surround sound mode
Experience an immersive audio experience with
surround sound modes.
1
Press SOUND SETTINGS /
options ).
2
Select SURROUND , then press OK .
3
Press the Navigation buttons (up/down) to
select the following settings:
•
DOLBY VS : Dolby Virtual Speaker.
•
STEREO : Two-channel stereo sound.
Ideal for listening to music.
14 EN
4
Change treble, mid and bass
Change the high frequency (treble), mid
frequency (mid) and low frequency (bass)
settings of the home theater to suit your video
or music.
1
2
3
4
Synchronize audio with video
If the audio and video are not synchronized, you
can delay the audio to match the video.
1
2
3
4

Play a disc

( Sound
The home theater can play a wide variety of
discs, including video, audio and mixed media (for
example, a CD-R that contains JPEG pictures and
MP3 music).
1
2
3
( Sound
Press OK to conÀ rm your choice.
Press SOUND SETTINGS /
options ).
Select TREBLE , MID or BASS , then press
OK .
Press the Navigation buttons (up/down) to
adjust the frequency level.
Press OK to conÀ rm.
Press SOUND SETTINGS /
options ).
Select AUDIO SYNC , then press OK .
Press the Navigation buttons (up/down) to
sync the audio with the video.
Press OK to conÀ rm.
Insert a disc into the home theater.
Press DISC , or select [play Disc] in the
home menu and press OK .
» The disc plays or the disc main menu
appears.
Press the following buttons to control play:
( Sound
( Sound