Update Software From A Usb - Philips HTS5220/12 Manual

Update software from a USB

1
Check for the latest software version on
www.philips.com/support.
•
Search for your model and click on
'software and drivers'.
2
Create a folder named 'UPG' in the root
directory of your USB storage device.
3
Download the software into the '\UPG'
folder of the USB storage device.
4
Unzip the software in the '\UPG' folder.
5
Connect the USB storage device to the
home theater.
6
Press ( Home ) and select [Setup] .
7
Select [Advanced] > [Software Update] >
[USB] .
8
Follow the instructions on the TV to
conÀ rm the update.
» When complete, the home theater
automatically switches off and restarts.
•
If not, disconnect the power cord for a
few seconds and then reconnect it.
Caution
•
Do not turn off the power or remove the USB
storage device when the software update is in
progress because you might damage the home
theater.
24 EN
8 Product
specifications
Note
•
SpeciÀ cation and design are subject to change
without notice.
Region code
The type plate on the back or bottom of the
home theater shows which regions it supports
Country
Europe,
United Kingdom
Asia Pacific, Taiwan,
Korea
Latin America
Australia,
New Zealand
Russia, India
China
Playback media
• AVCHD, BD-RE, BD-Video, DVD-Video,
DVD+R/+RW, DVD-R/-RW, DVD+R/-R
DL, CD-R/CD-RW, Audio CD, Video CD/
SVCD, Picture CD, MP3-CD, WMA-CD,
DivX (Ultra)-CD, USB storage device
File Format
• Audio: .mp3, .wma, .wav
• Video: .avi, .divx, .mkv, .wmv
• Picture: .jpg, .gif, .png
Amplifi er
• Total output power: 400W RMS
• Frequency response: 20 Hz-20 kHz / ±3dB
• Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
DVD BD
C C
C C