Audio Setup - Philips HTS3265/75 Manual

Audio Setup

(underlined options are the factory default settings)
Speakers Volume
Speakers Delay
CD Upsampling
Audio Sync
Setup Menu Options
Access the speaker's level setup menu. Use
the volume level for each connected speaker between -6dB to
+6dB. See 'Getting Started - Setting the speakers' channels'.
Access the speaker's distance setup menu. Use
the delay times for the centre and rear speakers based on the
listening position and distance. See 'Getting Started - Setting
the speakers' channels'.
Note: 1 ms increase/decrease of delay time is equivalent to one (1) foot
change in distance. Use the longer delay time settings when the rear
speakers are closer to the listener than the front speakers.
This feature enables you to convert the music CD to a
higher sampling rate using sophisticated digital signal
processing for better sound quality.
{ Off } –
{ 88.2 kHz (X2) } –
Notes:
– This function is not available if you switch to Multi-channel mode.
– If you press SURROUND on the remote control, it turns off the
CD upsampling feature.
This feature allows you to adjust the audio delay times if the
video playback is slower than the audio output streams.
Use keys to set the delay times for the audio output
between 0~200ms.
Turn off CD-upsampling.
To convert the sampling rate of the
CDs twice as high as the original rate.
(continued)
keys to adjust
keys to set
37