Table of Contents
Advertisement
The extension of the left and right sowing marker will be as follows:
Driving the sowing-machine during the sowing process is showed schematically in
Fig. 18.
10.2.8. SETTING AND ADJUSTING OF TECHNOLOGICAL PATHS
Achieving better and better productivity not only depends on a proper agricultural
technology/technique and required sowing material but it also depends on adequate
fertilization and plants tending methods used throughout the whole vegetation period
and particularly in the period from stalk shooting to the period of blooming. The
technological paths allow to use sprayers and sowing machines in a precise way and
the same applies to the particular activities, which can be also performed with high
precision, for example; it enables for a double spraying of paths.
2.
1.
6.0 m
Methods of outlining technological paths 3m – sowing machine, 12m – sprayer.
TS
- sowing rides where technological paths are going to be outlined have been
marked.
1,2,3
- sowing rides during which the seed will be sown with the use of the whole
width of the machine (without technological paths to be outlined).
Sowing Machine AMBER 900/3
S s = S r - d = 300 - 12,5 = 287,5 cm
−
S
t
287,5
=
+
=
s
Z
d
2
1.
TS
6.0 m
12.0 m
Half the sowing machine not sowing seed has
been marked.
Figure 20
−
150
+
=
12
5 ,
81,3
cm
2
28
3.
TS
6.0 m
Advertisement
Table of Contents
