Fillikid W-05 Manual page 12

9. Attach both head support buckles, making
sure that the head support area remains folded
down. You will hear a 'click' when the buckle is
secure. Adjust the size of the head support area
by pulling both of the head support straps.
10. To adjust how high the baby rides on your
chest, lift the baby slightly and pull the shoulder
strap adjuster, first on one strap, then on the
other. When the baby is properly positioned, you
should be able to tilt your head forward and
kiss the top of your baby's head.
IMPORTANT: The baby should NEVER be
leaning forward in the carrier.
NOTE: The arms of smaller babies should be
positioned below the head support buckles.
Larger babies' arms should be above the buckles
and rest comfortably over the folded-down head
support.
4) Backpack Position with Wide Seat (8 - 15kg)
STOP! First time users, DO NOT attempt to use the carrier in the Backpack
Position without the assistance of a second person.
IMPORTANT! The baby MUST be able to sit up on his or her own before
being worn in the backpack position.
1. To adjust the conversion flaps for the wide seat
position,attach the button hole over the conversion
toggle on the waist belt.
2. Place your arms through the straps like you are
putting on a jacket. The carrier should be hanging
down behind you.
3. Connect the chest/back buckle. You will hear a
'click'when the buckle is secure. Pull the strap to
tighten.