Read Carefully And Keep For Future Reference - Breville VKT230X Instructions For Use Manual

UK
PRODUCT SAFETY
READ CAREFULLY AND KEEP FOR
FUTURE REFERENCE
This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical, sensory
or mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Children
shall not play with the
appliance. Cleaning and
user maintenance shall
not be made by children
unless they are older than
8 and supervised. Keep the
appliance and its cord out of
the reach of children aged
less than 8 years.
Never use a power base other
than the one supplied with the
appliance.
Never fill the kettle above the
MAX marking. If the kettle is
overfilled, boiling water may
be ejected.
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard.
4
! This appliance generates heat during
use. Adequate precaution must be taken
to prevent the risk of burns, scalds, fires
or other damage to persons or property
caused by touching the exterior whilst in
use or during cooling.
! Never use this appliance for anything
other than its intended use. This
appliance is for household use only. Do
not use this appliance outdoors.
! Always ensure that hands are dry before
handling the plug or switching on the
appliance.
! Always use the appliance on a stable,
secure, dry and level surface.
! This appliance must not be placed on or
near any potentially hot surfaces (such
as a gas or electric hob).
! Do not use the appliance if it has been
dropped, if there are any visible signs of
damage or if it is leaking.
! Ensure the appliance is switched off and
unplugged from the supply socket after
use and before cleaning.
! Always allow the appliance to cool
before cleaning or storing.
! Never immerse any part of the
appliance or power cord and plug in
water or any other liquid.
! Never let the power cord hang over the
edge of a worktop, touch hot surfaces or
become knotted, trapped or pinched.
! Never leave the appliance unattended
when in use.
! Beware of steam coming from the spout
or lid especially during refilling. Never
open the lid during the boiling cycle.
! Never fill the appliance when it is
positioned on the power base.
! Never use the kettle without sufficient
water in the kettle for it to operate
correctly.
! Never allow the appliance to boil dry.
ELECTRICAL SAFETY
This appliance must be earthed.
If the plug is not suitable for the socket outlets in
your home, it can be removed and replaced by a
plug of the correct type.
If the fuse in a moulded plug needs to be changed,
the fuse cover must be refitted. The appliance must
not be used without the fuse cover fitted.
If the plug fuse requires replacement, a fuse of the
same rating as that fitted by the manufacturer must
be used. In order to prevent a hazard do not fit a
fuse of a lower or higher rating.
If the terminals in the plug are not marked or if you
are unsure about the installation of the plug please
contact a qualified electrician.
Plug should be ASTA approved to BS1363
Fuse should be ASTA approved to BS1362
Green/Yellow
(Earth)
Blue
(Neutral)
Brown
(Live)
Ensure that the outer sheath of
PARTS
the cable is firmly held by the cord grip
1. Filter behind the spout
2. Spout
3. Pull off lid
4. Water level window
5. On/off switch
6. 360 rotational power base with cord storage
Due to our policy of continuous improvement, the actual product may differ slightly from the one illustrated in these instructions.
BEFORE FIRST USE
Remove any packaging and promotional material
from your kettle and position it on a stable, secure,
dry and level work surface away from the edge.
Before connecting to a power source, make sure
your mains supply voltage is the same as the one
indicated on the appliance. Connect the plug to a
suitable power outlet and make sure that the power
cord does not overhang the work surface. Excess
power cord can be stored in the power base.
Remove the kettle from the power base and open
the lid. Fill your kettle to the maximum mark and
close the lid.
Place your kettle back onto the power base. Switch
your kettle on, allow it to boil then discard the water.
Repeat twice. This will remove any residue left over
from the manufacturing process.
USING YOUR KETTLE
If this kettle is filled above the maximum level
mark, hot water may be ejected from the spout
during boiling. Beware of steam coming from
the spout or lid especially during refilling. Never
open the lid when the kettle is boiling.
1. With your kettle switched off, plug the power
base into a suitable power outlet.
2. Remove your kettle from the power base before
filling it with water.
3. Fill your kettle with water. You can fill it through
the spout or by opening the lid. Don't overfill
your kettle and always ensure that there is
sufficient water in your kettle for it to operate
correctly. This is approximately 250ml or 1
teacup full. Always check the water level when
your kettle is positioned on its power base.
4. If opened previously, close the lid and then
switch your kettle on. Make sure that the lid is
correctly closed to ensure safe operation. As the
water heats up the water level illumination will
change from white to red.
5. When the water reaches boiling point, your
kettle will switch off automatically and the water
level window illumination will switch to the 'still
hot' illumination.
5
UK