Updating Software Automatically (For Service Use) - Philips 42PFL7932D/78 User Manual

Updating software automatically (For Service Use)

7. You will be prompted to select the USB
disk.
8. Press the u button to select the USB disk.
The filename will be displayed.
9. Press the u button to select the filename.
10. You will be prompted to confirm perform-
ing the update. Use the Í or Æ buttons to
select Yes and press the u button.
A pop-up window will display an indicator
bar while the update is in progress.
When the update has completed, the
screen will go blank momentarily.
11. Switch off the TV set from the wall socket
mains for one to two seconds.
12. Switch on the TV set again.
The new software is now installed.
Setup | Information | New Software
Select USB disk
USB disk1
Select file to upgrade.
Setup | Information | New Software
Select USB disk
USB disk1
Confirmation
Do you really want to update?
Yes No
Select file to upgrade.
Setup | Information | New Software
Select USB disk
USB disk1
Updating
Programming flash
Select file to upgrade.
28
Select file
upgrade.zim
Close
Select file
upgrade.zim
Close
Select file
upgrade.zim
Close