Setting Up The Tv And Radio Channels; Testing Your Tv Reception - Philips 42PFL7932D/78 User Manual

Setting up the TV and radio channels

Testing your TV reception

This option lets you check the strength of
the signal that is being transmitted via your
aerial connection.
1. Press the button on the remote
control and use the Î or ï button to
select Digital TV from the source list.
2. Use the numeric buttons
CH +/- buttons to switch to the digital
channel you would to test the signal.
3. Press the button to display the
Setup menu.
4. Press the ï button to select
Installation, and press the Æ button.
ï button to select Test
5. Press the
Reception, and press the Æ button.
6. Press the Æ button to select the
Frequency option. The frequency of the
current channel is displayed.
ï button to select Network
7. Press the
name. The name of the broadcast
channel is displayed.
8. Press the ï button to select Signal
quality. An indicator bar is displayed
showing you the quality level of the TV
signal.
9. Press the ï button to select Signal
strength. An indicator bar is displayed
showing you the strength level of the TV
signal.
10. Press the button to exit the menu.
TIP: If the signal strength is poor, consider
adjusting or changing your aerial. Contact a
professional aerial installer for best results.
(0-9) or the
18
Setup | Installation
Installation Test Reception
Frequency
Service List
Network name
Service Setup
Test Reception Signal quality
Signal strength
Close
Setup | Installation
Test reception Frequency
Frequency 569143 Khz
Network name
Signal quality
Signal strength
Setup | Installation
Test reception Network name
Frequency BAND-HD
Network name
Signal quality
Signal strength
Setup | Installation
Test reception Signal quality
Frequency
Network name
Signal quality
Signal strength
Setup | Installation
Test reception Signal strength
Frequency
Network name
Signal quality
Signal strength