Cambridge Audio CXN V2 Manual page 31

Table of Contents

Control Bus

If your device is connected to a Cambridge Audio ampliﬁer using a control bus connector, volume commands can be sent directly to the ampliﬁer.

For more information, please refer to the Getting Connected section of this manual under 'Control Bus'.

Pre-amp

With Pre-Amp mode enabled the volume of the device's line output can be controlled using the app, the remote or the rotary dial.

For more information see our FAQ.

Volume Limit

This sets the maximum volume that other streaming services like AirPlay 2, Spotify, TIDAL Connect and Chromecast built-in can set. The front panel,

remote control and StreamMagic app volume controls can override this setting.

Early Update

Early Updates provide the opportunity to receive pre-release ﬁrmware for your CXN (V2). To subscribe to Early Updates, select On, and to opt out

select Oﬀ.

Note: Information on what is included in the current early update for the CXN (V2) can be found here.

Firmware

This will check for and apply any new ﬁrmware available for your network player. You can also check for new updates on the info screen. When left

in network standby overnight your player will check and apply any new updates.

Note: Your network player must be connected to the internet to carry out ﬁrmware updates. It is recommended that you keep your network player

connected to ensure optimal performance. Information on the latest ﬁrmware version for the CXN (V2) can be found here.

Factory Reset

This will return your player to its factory settings.

You may perform a factory reset via the front panel controls/remote control (Home > Settings > Factory Reset). Or, via Settings in the

StreamMagic app.

Note: Returning the player to its factory settings will delete all previously saved network settings and presets.

Table of Contents

Show Quick Links

Table of Contents