Advertisement
Connecting the ERM to the UPS
This symbol indicates the presence of electric
shock hazards. The area contains no user or field
serviceable parts. Do not open for any reason.
WARNING: To reduce the risk of injury from
electric shock hazards, do not open this
enclosure.
Plug the ERM cable into the socket at the rear of the UPS.
Attaching the RETMA rail covers
NOTE: The HP logo and product name are printed on the
RETMA rail covers; therefore, the HP logo badge is only
used for a tower installation/configuration.
Charging the ERM batteries
Connect the UPS to a grounded utility power outlet. When the UPS is
plugged in, the unit automatically enters Standby mode and begins
charging the ERM batteries. Allow 24 hours for the ERM to fully
charge.
Advertisement
