Table of Contents
Advertisement
Instrument operation
Item
US Unit
Metric Unit
Save
Back
Depth alarm setting screen
The water depth for the depth alarm can be
set.
Depth Alarm
4.0
Save
Item
Save
Back
72
Function
Sets the display units to
US units.
Sets the display units to
metric units.
Saves the selected unit
setting as the current units
and displays the setting
screen.
Displays the setting screen
without saving the select-
ed unit setting.
ft
Back
Function
Saves the set water depth
as the current depth alarm
setting and displays the
setting screen.
Displays the setting screen
without saving the set wa-
ter depth.
To adjust the water depth setting:
1
Slider control
To reduce the water depth setting, drag the
slider to the left.
To increase the water depth setting, drag the
slider to the right.
Maintenance setting screen
This screen displays the number of hours that
the engine has been running since the last
maintenance.
Time Since Last Maintenance
Reset
After maintenance is performed, reset the
number of hours of operation as follows.
To reset the number of hours of operation:
(1) Tap the "Reset" button.
1
Reset
1
"Reset" button
(2) When the confirmation message ap-
pears, tap the "YES" button to reset the
number of hours of operation.
1
0
Hrs
Back
Back
Advertisement
Table of Contents
