Table of Contents
Advertisement
First-time operation
Engine break-in
(AR190 / SX190)
NOTICE
Failure to perform the engine break-in
could result in reduced engine life or even
severe engine damage.
The engine break-in period is essential to al-
low the various components of the engine to
wear and polish themselves to the correct
operating clearances. This ensures proper
performance and promotes longer compo-
nent life.
(1) Check the engine oil level. (See page 101
for information on checking the engine
oil level.)
(2) Launch the boat and start the engine.
(See page 117 for information on starting
the engine.)
(3) For the first 5 minutes, operate with the
engine at trolling speed.
(4) For the next 30 minutes, operate with the
engine speed below 5000 r/min.
(5) For the next 1 hour, operate with the en-
gine speed below 6000 r/min.
After the engine break-in is complete, the
boat can be operated normally.
106
Engine break-in
(195S / AR195 / SX195)
NOTICE
Failure to perform the engine break-in
could result in reduced engine life or even
severe engine damage.
The engine break-in period is essential to al-
low the various components of the engine to
wear and polish themselves to the correct
operating clearances. This ensures proper
performance and promotes longer compo-
nent life.
(1) Check the engine oil level. (See page 101
for information on checking the engine
oil level.)
(2) Launch the boat and start the engine.
(See page 117 for information on starting
the engine.)
(3) For the first 5 minutes, operate with the
engine speed at 2000 r/min.
(4) For the next 90 minutes, operate with the
engine speed below 5000 r/min.
After the engine break-in is complete, the
boat can be operated normally.
Advertisement
Table of Contents
