Care & Cleaning; Cleaning The Exhaust Fan Filter; Storage - Emeril Lagasse POWER GRILL 360 PLUS AFGO-01 Owner's Manual

Cleaning
1. Remove the power cord from the electrical outlet and
be certain the appliance is thoroughly cooled before
cleaning. Remove the accessories and use a nonabrasive
sponge or dish cloth to wash with warm water and mild
dish soap.
2. Clean the inside of the appliance with a damp, soapy
dishcloth or nonabrasive sponge. Gently wipe the heating
coils. Do not scrub the heating coils because they are
fragile and may break. A soft nylon bristle brush can
be used to clean the interior. Use a clean, dry cloth to
dry the appliance interior. Do not leave standing water in
the appliance.
3. To remove food residue from accessories, soak
the accessories in warm, soapy water. Should the
accessories contain difficult-to-remove food particles,
soak in hot, soapy water for 10 minutes. Use a soft
nylon bristle brush or nonabrasive sponge.
4. After each use, wipe the outside of the appliance with
a nonabrasive sponge or dishcloth and mild dish soap.
Remove any soap residue with a damp dishcloth.

Cleaning the Exhaust Fan Filter

1. Let the appliance cool before cleaning the Exhaust
Fan Filter.
2. Remove the Glass Lid, Grill Plate, and Grill Drip Tray.

Storage

1. Ensure the appliance is unplugged, cool, clean, and dry.
20 Emeril Lagasse Power Grill 360 Plus
™
Cleaning Tips
• Clean the appliance after each use.
• The Grill Plate is coated with a special nonstick surface.
Never use abrasive cleaning materials or utensils on these
surfaces. Accessories are dishwasher safe. Handwashing
is recommended.
• Do not soak or submerge the appliance in water or wash
in a dishwasher.
• Your appliance has metal edges. Be careful when
handling and cleaning.
• Do not disassemble or unscrew anything to clean.
• Do not use steel wool or other metal pads. They could
leave coarse scratches. Always rinse thoroughly and dry
immediately with a soft towel.
3. On the right-hand side of the inside of the appliance, you
will see the Exhaust Fan Filter. Push one end of the Exhaust
Fan Filter and the other end will pivot outward. Pull out the
Exhaust Fan Filter.
4. Wash the Exhaust Fan Filter. Replace the Exhaust Fan
Filter by sliding it back into place where it was removed
from the appliance.
2. Place the appliance in a clean, dry place. Do not stack
objects on top of the appliance.